PVE 52: three-person lift

Technology at the service of well-being, so that acquiring a residential lift with wheelchair capacity doesn't mean giving up on design.

238 kg maximum weight

1316 mm external diameter

A residential lift with wheelchair capacity, 360º panoramic view and very easy to install as it requires no pit or machine room. Its installation takes three days and maintenance is minimal compared to traditional lifts, as the PVE52 operates without pulleys and uses no greases or oils. The PVE52 stands out for its zero impact in terms of use of polluting substances.

elevator vaccum

The PVE52 model has an external diameter of 1316 mm. This residential lift has capacity for three people (238kg) or one person in a wheelchair along with a companion.

It is available in two, three, four and five stops (maximum 15m travel).

A residential lift with wheelchair capacity, 360º panoramic view and very easy to install as it requires no pit or machine room. Its installation takes three days and maintenance is minimal compared to traditional lifts, as the PVE52 operates without pulleys and uses no greases or oils, characteristics that also define it as an ecological lift.

This wheelchair-accessible residential lift is available in all color possibilities of the PVE range. Our PVE52 pneumatic lift offers space and uncompromising safety, along with an elegant and functional design that allows it to be perfectly integrated into any new construction project or existing single-family home.

image image image image image image image image

Technical specifications

+
  1. External cylinder diameter: 1316 mm
  2. Maximum load: 238 kg
  3. Capacity for three people or one wheelchair passenger plus a companion.
  4. Speed: 15 cm/sec
  5. No pit required. Direct installation on existing floor.
  6. No machine room required.
  7. Motor power: 6kW
  8. Power supply: 220-230V single-phase 30 A, or 380V three-phase 16 A
  9. Electronic circuit: Command and control: 24 V.
  10. Door passage width: 813 mm
  11. Cabin interior diameter:
  12. Between columns: 1092mm
  13. Without columns: 1210mm
  14. Automatic LED lighting and ventilation
  15. Telephone in cabin
  16. Internal cabin height: 2010 mm
  17. Door height: 2036 mm
  18. Door height including door closer system: 2078 mm
  19. Door/landing configuration: all floors aligned at 0º and possibility of opposite landings at 180º.
  20. Door opening: Door hinge on right side – door handle on left side (from outside the lift). Optional Door hinge on left side – door handle on right side (from outside the lift)
  21. A single door per floor
  22. Safety: Overload limiting valve; low cabin voltage; emergency alarm.
  23. Warranty: Three years from installation.
  24. The PVE pneumatic lift complies with the Machinery Directive 2006/42/EC
  25. CE Marking Certification
  26. Lift specially designed for indoor home use and installation (CANNOT BE DIRECTLY EXPOSED TO WEATHER)

Installation requirements

+
  1. The minimum height required on the upper floor is 2.70 m head format and 2.45m for split format. Check formats
  2. The diameter of the perforation in the slab, if necessary, would be 1389 mm.
  3. The ground floor, where the cylinder rests, must be perfectly level.
  4. In the case of installing a 3 or 5-stop lift, the circular perforations in the slabs must be perfectly aligned.
  5. 220-230V single-phase electrical power must be available through an independent line with earthing, a 32A thermomagnetic switch, and cables of corresponding section, for the exclusive use of the lift. Alternatively, 380V three-phase electrical power through an independent line with earthing, a 16A thermomagnetic switch, and cables of corresponding section, for the exclusive use of the lift.
  6. 220-230V (without exception). If the electrical installation does not guarantee a stable current, the installation of a voltage regulator or transformer is recommended. Damage caused due to voltage fluctuations is not covered by the warranty.
  7. The electrical point should be close to the vacuum motor. It is recommended to leave approximately 2 m of cable.
  8. Telephone connection. GSM line possibility.
  9. For environments with reduced spaces, it is advisable to install the split format.
  10. There must be access that allows the passage of cylinders (approx 1389 mm in diameter and 2340 mm in length) to the place planned for its installation. This access can be through doors, windows, skylights, etc.
  11. The installation must allow for an anchor point to support minimum 1000 kg in the ceiling of the place where the lift is installed to lift its cylinders. The available height on the top floor must be at least 2700 mm.

Technical documentation

+

Technical sheet of the PVE30 pneumatic elevator

Colors and Finishes

Plans

2 stops

3 stops

4 stops

5 stops